Recent content by brianmcb

  1. brianmcb

    Clutch time (LS + nv3500)

    Long story short, been running the original 4.3L clutch in my nv3500 for four years now, and she's slipping now. Engine is mild, flywheel dyno'd at 438hp. I planned on this transmission to grenade long ago but it's still tight as can be. Are there any good clutch options I can look into...
  2. brianmcb

    What type of rims are on your truck

    Playing around with the idea of going back to small wheels. My 20s just ride horrible. Had these 15x8 rallys around, putting 245/60 and 275/60 on. Going to sand blast and paint the wheels, just not sure what color. The rear tires are a tight fit with 7" drop in the back, but they do fit Sent...
  3. brianmcb

    G80 CARRIER QUESTIONS

    The kit will work with your g80, you "might" get lucky using all factory shims, but I doubt it. I just did motive 4.10s in my truck and had to mess with pinion shims as well as the carrier shims. Sent from my SM-A705W using Tapatalk
  4. brianmcb

    DBW pedal Construction

    Pic Sent from my SM-A705W using Tapatalk
  5. brianmcb

    DBW pedal Construction

    Pic Sent from my SM-A705W using Tapatalk
  6. brianmcb

    DBW pedal Construction

    I modified an 05 truck pedal for my swap. Works excellent and feels perfect. Plus the 05 bracket bolted to two of the original holes, only had to drill 1 more Sent from my SM-A705W using Tapatalk
  7. brianmcb

    NV3500 breaking point?

    Mine is a v6 version. 438hp going into it Sent from my SM-A705W using Tapatalk
  8. brianmcb

    NV3500 breaking point?

    438hp at the flywheel of mine. 3 years going, still doing fine. Has 285k on it to Sent from my SM-A705W using Tapatalk
  9. brianmcb

    NV3500 rebuild

    He probably means syncos, not servos. If the noise comes and goes with clutch pedal action it's most likely the throw out bearing. Pilot bearing would squeal all the time if it was bad Sent from my SM-A705W using Tapatalk
  10. brianmcb

    2 Drop spindles with 2 in springs wanting another inch

    Cut a half coil off. Rides fine. I cut my stock coils for 3" Sent from my SM-A705W using Tapatalk
  11. brianmcb

    static drop pics

    Wheels were 15x8. 4" backspace. I think that worked out to a -12 offset? This setup rubbed, had to roll my fender lips Sent from my SM-A705W using Tapatalk
  12. brianmcb

    Rear disc conversion parts Canada..

    I got a quote from them to and it was nearly 1200 bucks by the time it was shipped and all fees paid. Sent from my SM-A705W using Tapatalk
  13. brianmcb

    Rear disc conversion parts Canada..

    Yes. My truck is a manual to so I would want one regardless Sent from my SM-A705W using Tapatalk
  14. brianmcb

    Rear disc conversion parts Canada..

    I wanna rear disc my 95 c1500. Gonna cost me around $1000 if I order the little shop kit which is to much. Any fellow northern folk find any kits or parts up here ? Sent from my SM-A705W using Tapatalk
  15. brianmcb

    Motive gear pinion markings

    I'm putting a set of motive 410's in my rear end (8.5" 10 bolt) and I'm trying to decipher the factory markings on the pinion that they engraved. Looks like Z89 and Z572..I just don't see how these are pinion depth markings. Maybe I'm just tired and missing something simple. I made setup...
See more

Latest posts

Members online

... and 15 more.
Total: 1,635 (members: 65, guests: 1,570)

Forum statistics

Threads
64,330
Messages
1,391,451
Members
51,431
Latest member
Noel11

Share this page

Top