I've been out of the loop for a while. Has anyone solved the issue with the crappy steering. ??
Just like everyone else I've replaced everything and installed work van steering shaft universal joint.
I took some seats and console out of a NBS tahoe. I'm 6ft3, and my truck is a regular cab, with sub box and those seats shoved me forward and my knees hit the dash
Excellent question, that has been haunting me for the last 24 hrs. I'm thinking so. Which means my axle would be closer to trans rather than moved back an inch, which might cause some rubbing from the drive shaft (?). Also if the axle saddles are on the wrong side I think it would throw of...
Yeah, I wish people would update their post when they solve a problem. Like the sloppy steering issue.
I just looked at my pinion angle and it is horrible. Soon as I get time I'll tear it apart and get it straightened out, and I will update.
I know this is an old post, but I had the exact same problem after doing a flip kit. It has Extremely Loud at low speeds right before I come to a stop, and today I realized that if I put it in neutral that it doesn't do it. I've checked my brake lines, new drums. Scuffed them up. but someone...
Replaced Everything on rear brakes, adjusted several times, bled several times. Still has a squeeling, sounds like a whale. I can adjust and all is fine for about a day.
I'm wondering if a NBS m aster cylinder will remedy this? Any suggestions?
What upper control arm are you using? Is that from an HD truck? I was told a long time ago you can use them, turn them upside down, and swap driver and passenger and the geometry would be better for a lowered truck
Ok kewl. ever since I installed my flip kit, I've had this noise coming from the rear drums, just before I come to a complete stop. it sounds like there isn't enough pressure to force the shoes the drum, sounds like the are just touching thing and makes an awful howling sound. Sounds like a...
I have a master cylinder from an 03, and now I have time to do this mod. So now y'all are saying it won't work unless I bend new lines and install a residual valve??
I know it's an old thread but I'm thinking of doing this. A replacement rack from an 06 Chevy/GMC, I'd weld bolts to the cross member, possibly notch the horn on front of the cross member. My question is the pump,..replace it? Will my stock one work? Will the 06 stock one bolt on?
I got mine figured out a few years ago. My harnes was hacked into so I stripped out all the wires and rebuilt it using stock colors. And the lights under dash next to the kick panels and your door lights are connected to the harnes. Ech window uses 2 wires if you throw 12v to one word windo goes...