Recent content by 90halfton

  1. 90halfton

    LSMFG Fronts and a Piece together rear kit!!!

    Can buy rear cylinders off an 82 Eldorado with ebrake bracket at any parts house (thats what lsmfg uses)
  2. 90halfton

    Little shop mfg rear disc installed

    90lsx has a thread with part numbers in the axles and brakes column that may help you
  3. 90halfton

    Little shop mfg rear disc installed

    I do not
  4. 90halfton

    New Engine install Electrical issues

    Wurring sound? Lol. I'd find that first. What all did you disconnect in this process. I would start there. Power. Grounds. Everything. Go back through everything you touched and make sure its tight and clean. And also anything you could have inadvertently damaged. A volt meter is your...
  5. 90halfton

    3.08 to 3.42

    Ya, 275 tires i don't think I'd go smaller than 3.73. Your mileage will more likely increase than decrease.
  6. 90halfton

    3.08 to 3.42

    Swapped out my 3.08s to 3.42s when I rebuilt the rear of my 90 c1500. 350, auto, 235 tires. Made it far more drivable, pulled a trailer better (5k lbsish), and keeps a happy rpms at 75 unloaded in od. Gears are the best mod for these trucks. No supplement for mechanical advantage. If you...
  7. 90halfton

    10K possible with a 4.3 and NV3500?

    I occasionally pull 6k with my 1500. That's all ill be pulling with it. I've towed enough weight properly, big rigs and dually pu's. I know what right feels like as well as wrong. That much weight behind a half ton 400 is sketchy af. Completely dumb to dump a bunch of money into it just to...
  8. 90halfton

    Rear disc brake conversion

    I used lsmfg kit on my 5 lug and love em. Most noticeably while pulling a trailer without trailer brakes
  9. 90halfton

    So you're thinking about the LSMFG Rear Disc Brake Kit? Here's my .02... (Tips and Tricks Guide)

    I'm running this kit as well. Right after installing the kit I thought the truck stopped...idk....20% better. Now that the pads have had more time to wear in (maybe 1000 miles now) I can feel improvement. Pulling a trailer is where I really notice the gains from rear disc's tho.
  10. 90halfton

    TBI Throttle body 88-95 ridge removal

    Going to need a wheelie bar
  11. 90halfton

    Exhaust on my LQ4 swap, use flex pipes or not?

    Ah....I thought you were talking about the **** guys use 10' of cause they either suck or have a 100$ car they're trying to limp by. Nothing wrong with those. My system has been welded solid for 12 years now, on 30 year old factory manifolds. Dont think you'll have problems running a rigid...
  12. 90halfton

    Exhaust on my LQ4 swap, use flex pipes or not?

    Awful lotta work swapping to half ass the exhaust with flex...in my opinion. It will make the exhaust flow to the back of the truck tho....
  13. 90halfton

    AC compressor pressure switch, single pin?

    Huh....replaced that switch 10 years ago and wonder why the recirc door hasn't worked lol. I just didnt hook the other wire to anything because of apparently bad advice
  14. 90halfton

    Lifted Tahoe Gas Mileage and Suggestions

    If you are concerned about in town fuel mileage for some reason you will definitely want to regear both diffies Not to mention drivability.
  15. 90halfton

    Help me decide... 383 or LSx?

    Do you like high end or low end power? I have drove a 2500 6.0 as a work truck for years. Took a long time to not hate the high end power, but they're reliable light duty workhorses. I get in my 5.7 tbi personal truck and it feels stronger at low rpms. Trailer or not. In dirt bike terms...
Top