1500 heavy half 14 bolt Qs:

[DeucesAllin]

so...all the info i posted. thx lol

Sent from my SM-J700P using Tapatalk

 

[MIHELA]

so...all the info i posted. thx lol

Sent from my SM-J700P using Tapatalk

Yep, lol

 

[DeucesAllin]

i

Thanks, yeah that's 6.25 on a 10" wheel in back. I ran it for years with 8.5" wheels with a 5.5" backspace...

Details/specifics of tires and wheels.

How far from the springs was it?

Im a stepide. fenders trimmed alo ready. next step is spring relocation.. im having wheels made anyway...maybe 15 x 14 is possible.. if centere properly i can move to wrinkle walls easy later on.

Thanks, yeah that's 6.25 on a 10" wheel in back. I ran it for years with 8.5" wheels with a 5.5" backspace, even when it was an inch or so lower all around, same size tires on rear.

You must be registered for see images attach

Richard

Sent from my SM-J700P using Tapatalk

 

[88GMCtruck]

I know that a 14SF from a 4wd is about 3" wider than a 14SF from a 2wd. A 4wd 10-bolt falls somewhere in the middle of this.

When I swapped my 10-bolt for a C2500 14SF it was narrower...

 

[someotherguy]

Details/specifics of tires and wheels.

How far from the springs was it?

Im a stepide. fenders trimmed alo ready. next step is spring relocation.. im having wheels made anyway...maybe 15 x 14 is possible.. if centere properly i can move to wrinkle walls easy later on.

Truck's been gone for 3+ years now, couldn't tell you.

I know that a 14SF from a 4wd is about 3" wider than a 14SF from a 2wd. A 4wd 10-bolt falls somewhere in the middle of this.

When I swapped my 10-bolt for a C2500 14SF it was narrower...

Pretty much what I recall about 4WD vs. 2WD on the 9.5" 14 bolt but no exact measurement on hand.

Richard

 

[DeucesAllin]

SMH

Ive included **** like the axle shaft diameters... yall ******* keep telling me the 2wd is shorter than thd 4wd

I GOT THAT PART. lol

Just hoping to get a head start on the wheels. 15x10 with 6" BS is no problem... but I may have have something bigger made...

may just wait until i go to wrinkle walls.


Sent from my SM-J700P using Tapatalk

 

[someotherguy]

LOL...

Like I said, years ago partner. If I had all the **** in front of me you would read actual numbers in my posts.

I no longer have a shop with over 40 GMT400's sitting around to play with; though I do miss it a lot..

Richard

 

[Blackwater]

You just need the 2500LD u bolts. I did mine that way. I have pictures.


Sent from my iPhone using Tapatalk

 

[Blackwater]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Sent from my iPhone using Tapatalk

 

[DeucesAllin]

You just need the 2500LD u bolts. I did mine that way. I have pictures.


Sent from my iPhone using Tapatalk

Looks great man... what paint?

Im probably going to go straight POR15 this time.

Sent from my SM-J700P using Tapatalk