My 4 Hi Brake Mod

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dylans95Chevy

I'm Awesome
Joined
Dec 6, 2016
Messages
167
Reaction score
112
Location
Montana
Hello, just wanted to show my tail light upgrade over stock. I will be eventually ordering new housings and circuit boards. Got the 4 hi mod wired up today. Ill get pictures of the wiring later to show the hook ups. Ive also got 3357/3457 bulbs on order as well. Will be getting cree 18w led reverse bulbs later as well. I am using the stock circuit boards for now.
Left is stock, right is both lit up.
You must be registered for see images attach

Left is both lit up with bottom burnt out, right is both lit up again.
You must be registered for see images attach

Ill add more pics of the wiring once I get the new bulbs here.
 

Dylans95Chevy

I'm Awesome
Joined
Dec 6, 2016
Messages
167
Reaction score
112
Location
Montana
Finished up the 4 hi brake mod today with 3457 bulbs. A lot brighter in person.
Left Side wiring
You must be registered for see images attach

Right Side wiring
You must be registered for see images attach

Both sides brake lights on
You must be registered for see images attach

Parking/Driving lights on
You must be registered for see images attach

Brake light on
You must be registered for see images attach

Turn Signal
xc_hide_links_from_guests_guests_error_hide_media
 

Dylans95Chevy

I'm Awesome
Joined
Dec 6, 2016
Messages
167
Reaction score
112
Location
Montana
Looks great, what do you need to do to make this happen? Just add one wire and new bulbs?
2 wires per side, positive for powering the high filament and then ground the 2 filaments. New bulbs aren't necessary but I needed new bulbs anyway
 

Dylans95Chevy

I'm Awesome
Joined
Dec 6, 2016
Messages
167
Reaction score
112
Location
Montana
New led reverse lights
You must be registered for see images attach

You must be registered for see images attach
 
Top