Thanks everyone for the replies!
Crate motors are great for stock replacement and quick turn around.
Taking your current engine to a machine shop is good if you have specific power goals or build criteria in mind. Or just wish to support local small businesses.
Personally I take all of mine to machine shops to rebuild.
Didn't think about the local business aspect, will keep that in mind.
This. I had the same question in my head, but decided to go the GM crate motor route, since I'm in California. If you have a specific power goal in mind, I'd definitely say the way to go is getting your block machined. If you're going to keep it stock, get a crate motor and enjoy the warranty that comes with it, like me!
EDIT: Since you're in Texas... if you wanted to add some pep, you could always throw in a 383. I've heard it works wonders for these GMT400s. I was considering the HT383, but Commiefornia wouldn't allow such things to happen.
At the moment I'm thinking going stock, reading into the cost of upgraded injectors, marine intakes, etc I don't really have the interest to do deal with that. If I were going to hot rod a truck I'd rather go with something older and carbed. Would I need to be worried about beefing up the rest of the drive train with a 383?
A crate engine in my opinion is a great way to go. I was going to do a simple rebuild, but then I started picking parts to make the engine a little better here and there and the project is getting bigger and bigger. The crate engine is a great idea because you can pull the trigger and bam its there. The original 350 is pretty weak and leaves a lot to upgrade. Curt has a good idea with a 383 crate engine. These trucks do benefit from the added torque. You may need to get it tuned after that.
I was going on the rebuild path then started seeing that the fuel system has a limit on this and the added costs to get past that made me think about the 383. I love the truck but it's had a long life and I'm trying to decide just how much I want to put into it. I know the person I got this truck from and drove it years ago with the stock 5.7 at less that 100k miles when it still had some power and it stock was more than enough for me so I'm leaning back towards a crate engine.
at around 2500 for a longblock, its it cheaper than an engine build. BUT you never know who built the short block or how well it is built. lots o fcorners can and do get cut on cheap engine builds. sure they have warranty, but you still out for labor, and proof you didnt cause the fauilure and sometimes, freight is involved. so, you get a dud and it takes a dump and you ask for warranty. what happens if warranty is denied? what happens if you have to pay labor and shipping? you are stuck with less than you have now! at least now you have a REBUILDABLE motor.
option: check the BEST (and usually most expensive ) automotive machine shop local to you. ask if they offer complete rebuild on your engine. their warranty will be outstanding!
option: wrecking yard engine
option: buy wrecked truck with good engine and get all those good parts for free!
option: buy longblock from autozone. roflmao.....no, dont.
now, ask yourself, does autozone get engines from same source as other aftermarket suppliers???????????????????
You pretty much have summed up my thought process so far haha. I've read good and bad about the crate engines and that has me worried from some of what I've read. I guess I need to just go to the local shop I've used for older projects and talk to them about cost and warranty.
Why does everyone keep saying they can't find the crate engines in stock?
https://www.summitracing.com/parts/nal-12681432/
Thank you! I missed that! On the GM webpage and I think Jegs both show out of stock. I think I might have assumed that was the HD version if I did see it. After I talk to my local shop if I do go the crate route I'll go with that engine, thanks again!
Follow up question, what all should be replaced along with the rebuilt engine? I'm thinking new water pump, oil cooler, maybe radiator and hoses, plugs and wires of course, anything I'm overlooking? Flex plate and starter? Got a new battery already, anything easier to do while the engine is out for peace of mind down the road?