L31MaxExpress
I'm Awesome
Ahh, I thought they stalled closer to 2000 but that's probably where they stall behind the V6.
My brother had a 96 4.3 S10. Brake stalled 2,200 rpm behind a stock 4.3.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Ahh, I thought they stalled closer to 2000 but that's probably where they stall behind the V6.
As I recall there was a difference in the wiring in the 98 and later that wasn't compatible with the earlier versions. If I recall correctly the 96-97 used a 5 connector pcm and the 98-00 used a 4 connector.Ok. I have a PCM tune ? I have the stock 97 pcm and a 98 pcm. Which would be better to use until I can find a 411 and get it wired in.
As I recall there was a difference in the wiring in the 98 and later that wasn't compatible with the earlier versions. If I recall correctly the 96-97 used a 5 connector pcm and the 98-00 used a 4 connector.
Correct. Both of my '97s have a total of five connectors.
I believe HPT supports the 96-97 PCM. EFILive does not, so any tuner using that software will be unable to tune it.