This section is for info on LSX or carburetor swaps into the OBS trucks.
Hello, just a quick pic of the 6.0 finally in the truck!
Just as an introduction, my name is Colt and i'm from Jonesboro, AR. I'm new to this forum, but not new to forums in general. I have done a fair...
Will the ls1 heads fit on the older vortecs and if they can will they help much out in hp gain or anything and what other stuff can i put on mine off...
I had this brought to my attention just now and it is something that I have thought about doing to this truck. How much work is it to drop a 5.3...
Hey guys, I want to share with you all my summer project from 2009. Last year I was living in Amherst, Massachusetts in an apartment complex, my last...
im new to the site, was recommended to join..so here we go. bare with me this is basically a copy and paste as of right now. it all started...
Hows it going thought i would share some info and pictures. I pulled a lq4 6.0L from a 2004 gmc Sierra with a 4l80e. Its Drive by wire. So far ive...
New Here, and just finished a TBI v6 to Carb 350 swap. Here is a how to on how to keep the 4L60E working. Well, I finished swapping a Carb 350...
Ok heres the deal I have a 98 chevy single cab SWB with a 4.3 and Im wanting to upgrade. I have found a complete 6.0 with a tranny for kinda cheap...
has anyone swapped to a carb? if so why?
LS info should be posted here. How to identify your engine, what transmission you can run behind it, part numbers, and any other info involving...
What exactly is involved into swapping a gen III engine into an obdII truck? Is it just a simple swap and re-pinning the wiring harness to work with...
i found a truck i want to get , 95 3/4 ton ext cab short bed . 4x4 350 sbc with about 180,000 on the clock. im buying this as a DD and to tow my 05...
Hey guys. I have a 1998 chevy cheyenne rcsb. Its my daily driver so I have to keep it some what streetable lol...
Well some of you may have seen my build thread on gmfs. I did the genII swap in the winter of last year. The motor I bought was built pretty healthy...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules