Assman's_Z97
Newbie
Hey there, I just swapped out my tranny on my 97 Silverado 1500 z71 with a 3" body lift and now my 4x4 doesn't work. I have the push button NP243 transfer case and all I have happen when I go to engage my 4x4 is the lights on the buttons flash constantly and you can hear the transfer case itself make a sound like it is doing its job, but the actuator remains silent.
Any tips on what to check, I have double checked my connections on the TC itself and all were good and tight, not sure about any other possible causes as my haynes manual doesn't cover this problem.
Also I guess its worth a mention that the buttons in my dash sometimes don't light up unless I push on the dash, but it has been like that since I had to get the stealership to rewire my truck (due to a pinched trans 20 fuse that fried the whole wiring in my truck.) but it has always worked.
Any suggestions would be great
Thanks
Mike
Any tips on what to check, I have double checked my connections on the TC itself and all were good and tight, not sure about any other possible causes as my haynes manual doesn't cover this problem.
Also I guess its worth a mention that the buttons in my dash sometimes don't light up unless I push on the dash, but it has been like that since I had to get the stealership to rewire my truck (due to a pinched trans 20 fuse that fried the whole wiring in my truck.) but it has always worked.
Any suggestions would be great
Thanks
Mike