98 k1500 4wd not working!!!!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

popcorn501

OBS Enthusiast
Joined
May 21, 2011
Messages
95
Reaction score
1
Ok I was in the woods today and my 4wd wouldn't work. So when I got home I started checking stuff out found I had power to the front actuator in 4wd and it moved just seemed weak so I replaced it and still nothing. Any ideas????
 

popcorn501

OBS Enthusiast
Joined
May 21, 2011
Messages
95
Reaction score
1
Full power 12 volts. I'm guessing something inside is broke. Can ya get to it by removing the axle tube?
 

popcorn501

OBS Enthusiast
Joined
May 21, 2011
Messages
95
Reaction score
1
Brand new I thought maybe the old one was weak maybe so I put a new one in it same thing no 4wd
 

Hezsus

Mr. Truck
Joined
Feb 8, 2011
Messages
877
Reaction score
5
Location
Dublin, Ont
Check the switch, make sure you have power when it is pressed, probably need 2 guys for that one.
 

popcorn501

OBS Enthusiast
Joined
May 21, 2011
Messages
95
Reaction score
1
Everything is working the transfer case is shifting the actuator is going out got full 12 volt on it when you put it in 4wd.
 

Loss4wrds

OBS Enthusiast
Joined
Jun 11, 2010
Messages
79
Reaction score
1
Is your front drive shaft turning? Push button 4x4 or manual shift?
 
Top