woody80z28
I'm Awesome
I just swapped a BW4401 in my 1/2 ton along with the NV4500 (all from a 1T donor truck of the same year). All the plugs fit together perfect, although one connector had 3 wires in my truck, and only 2 pins on the tcase. There is also one wire connector on the tcase unplugged because I have nothing to plug in to it.
Now when I put the truck in 4WD the actuator light does not come on. (It is still on jackstands, so I haven't tested to see if the actuator is actually not engaging...but I'm betting not.
Any idea what the problem could be?
Now when I put the truck in 4WD the actuator light does not come on. (It is still on jackstands, so I haven't tested to see if the actuator is actually not engaging...but I'm betting not.
Any idea what the problem could be?