Eskimomann209
I'm Awesome
- Joined
- Jul 22, 2014
- Messages
- 618
- Reaction score
- 217
Ok formally 2 wd
98 ECSB chevy
Gm10 up front
14 bolt SF rear both in 6 lug
3 inch body lift
Sky's Sas kit
Plus 4 inch lift springs up front
I have my t case set just a little below the frame rails
-13 degree driveline out of the 4l60e to the np205 input
Case is tilted at 4 degrees down at output
From output to rear diff is also
-13 degrees
Length on that is 53"
Problem
I'm vibrating like a ****
Tomorrow I'm going to pull rear DL and put her in drive and get it up to 2500 rpm
Any other ideas to diagnose?
98 ECSB chevy
Gm10 up front
14 bolt SF rear both in 6 lug
3 inch body lift
Sky's Sas kit
Plus 4 inch lift springs up front
I have my t case set just a little below the frame rails
-13 degree driveline out of the 4l60e to the np205 input
Case is tilted at 4 degrees down at output
From output to rear diff is also
-13 degrees
Length on that is 53"
Problem
I'm vibrating like a ****
Tomorrow I'm going to pull rear DL and put her in drive and get it up to 2500 rpm
Any other ideas to diagnose?
Last edited: