I have a 1991 silverado that I had the case rebuilt. I screwed up the side that

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ng8264723

Newbie
Joined
Aug 17, 2014
Messages
15
Reaction score
0
that has the actuator in it. The flange that connects to the CV joint was coming in and out too easily. I took it off and was messing around with the small gear and put it on backwards and it got stuck. The locking clip apparently held it in that position. I tried to pull it with a puller and snapped the end off the shaft. Does anyone have the cmplt right side that bolts on with the 5 15mm bolts?
 
Top