jt1500
I'm Awesome
does it matter what brand of ATF? or do some transfer cases need an additive? ive been reading and its been hit and miss. its for a 96 k1500 with push button 4x4 if that makes a difference.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
This comes right out of the GM Manual, "fill transfer case up to fill plug with Auto-Trac(R) II Fluid (GM P/M 12378508). Install fill plug and tighten to 15 ft. lbs. (20 N.m)."
its for a 96 k1500 with push button 4x4 if that makes a difference.
This comes right out of the GM Manual, "fill transfer case up to fill plug with Auto-Trac(R) II Fluid (GM P/M 12378508). Install fill plug and tighten to 15 ft. lbs. (20 N.m)."
And is not correct. That is for an Autotrac transfer case. Regular push button takes Dextron III ATF.
the fill plug is a 30mm? that seems excessive?3 quarts I think is what I used. make sure you can get the fill plug out first. they are 30mm or something I know its metric. just fill her up till it starts coming out of the fill hole.