SCOTTYINWV
si vis pacem, para bellum
I tried to finally install the front driveshaft. Matched up the u joint from the ones that came with the driveshaft the P.O. Gave me with it. They were moog 354 u joints. The u joints were 1/8th in too big to fit the tabs in the yoke.
Finally found the correct size 353 moog. Was too late to install, so I will try Monday.
I got in a bind, and wouldn't shift into 1st or reverse until I shut the truck off. So I crawled back underneath and found Np 231c t case. The problem is missing transmission mount nuts....
But wtf is up with it having a 231c t case? My search shows it being from a 83-91 s series (blazer, s10 and Sonoma)? What gives? Is it possible?
Finally found the correct size 353 moog. Was too late to install, so I will try Monday.
I got in a bind, and wouldn't shift into 1st or reverse until I shut the truck off. So I crawled back underneath and found Np 231c t case. The problem is missing transmission mount nuts....
But wtf is up with it having a 231c t case? My search shows it being from a 83-91 s series (blazer, s10 and Sonoma)? What gives? Is it possible?