t case compatability

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

player1

Newbie
Joined
Aug 17, 2010
Messages
4
Reaction score
0
hi guys, im new to the site although i have been lurking around for a few weeks. but i have a question as to weather a t case from a 98 yukon will bolt up to a trans from a 89 sierra? i am going to put the powertrain from the 89 into the 98, since the 98 engine harness is butchered and doesnt have a motor and the trans is junk but want to keep the push button case instead if haveing to cut a hole in the floor.
 

Mike

I'm Awesome
Joined
Dec 2, 2009
Messages
1,585
Reaction score
455
Location
Mass.
Physically they should bolt up, the 700r4 has the same bolt patterns as the new transmissions. Good luck and post pics.
 

player1

Newbie
Joined
Aug 17, 2010
Messages
4
Reaction score
0
well after looking at the wireing diagrams, i think ill just stick with the case thats on it and cut a hole. thanks anyway and once i get it out of my friends garage and on the road ill get some pics up.
 
Top