Das Hatt's latest activity
-
Das Hatt replied to the thread Rear leaf spring shackle OEM?.Those are not stock shackles. However, if you just remove the bolt and position the leaf spring eye three holes down, it should be about... -
I'm glad you seen some improvement, happier that you are going to be looking at upgrading your wheel and tire situation. In my humble...
-
Das Hatt reacted to fancyTBI's post in the thread Wanted: Daily driver upgrades/mods suggestions with
Like.
Cab mounts. -
Das Hatt replied to the thread Keep Manifolds or get shorties?.Long tubes will require a little bit of custom work, whereas shorties should bolt right into the place of the factory manifolds with no...
-
Das Hatt reacted to MyOnlyDomestic's post in the thread What suspension/bushings/etc am I due for? with Like.
Thank you, I will explore all those options. I actually did see a couple gummed up zirk fittings in my quick look. Grabbed my grease gun...
-
Das Hatt replied to the thread What suspension/bushings/etc am I due for?.I see you redid your front brakes, maybe take a look at the rear brakes, pull the drum off, check how much shoe material is left. You...
-
This becomes more and more true as I get older.
-
And?
-
You have good pics to work with there. Note the sizes and shapes of the springs and disassemble. Adjust the star wheel in. Slap the new...
-
Yep, your screwed. If don't have the OE service manual, now is the perfect time to download it. Read the sections on HVAC, and...
-
Sounds like time to upgrade your wiring with the "Big 3". The wiring was not the best on these when they were new, and you are only...
-
If you start with , make , model , year, eng, you will get the best answers, advice. What works for suburban won't be best for K3500 HD...
-
Sorry about that. 1995 Chevy C1500 305 V8 5 speed extended cab
-
Das Hatt replied to the thread First time doing drum brakes.Yep, that's a standard configuration for the 10 inch drums. You're right you are missing a spring on the bottom that hooks into the two...
-
It will depend on the RPO brake option that your truck came with from the factory. If both trucks came with JB5 brakes then yes...
